What are the Average Costs of Tile & Grout Cleaning?
The national average cost of tile & grout cleaning is $445.
Typically, you can expect to pay anything between $277 and $642, with the lower end being $136 and the higher end being about $1,000.
That being said, tile & grout cleaning prices vary from company to company and from region to region.
Only for cleaning, you may pay around $0.25 to $1.25 per square foot. Some companies may charge this amount for cleaning and sealing. But bundling these services can cost you as much as $1.00 to $2.50 or more per square foot.
Grout sealing after tile & grout cleaning is highly recommended. This can add to the overall cost of cleaning. Try to bundle these services together to save money.
Most tile & grout cleaning company have a flat rate, which can be between $100 and $150.
What are the Benefits of Hiring a Professional Tile & Grout Cleaning Company?
Cleaning tiles & grout is a tough job. Typically, most homes in the US have tiles in their kitchens, bathrooms, laundry rooms as well as in the entryways. Usually, these are large areas and will take up a lot of time to clean them thoroughly.
To get your tile & grout really, truly clean, you’ll end up spending a full weekend.
That said, household cleaners and chemicals simply don’t get the job done as well as the professional grade cleaning solutions available to tile & grout cleaning companies.
So here are the top 3 benefits of hiring a professional tile & grout cleaning company.
1. Proper Cleaning Materials
Without the right materials, you can never get the tiles & grout cleaned thoroughly. Although store-bought products advertise that they can clean the tiles & grout meticulously, it’s often far from the truth.
This is because grout surfaces are extremely stubborn. They can usually be cleaned properly only with strong cleaning solutions and materials that are hard-to-get. As homeowners, you may not be able to get your hands on these solutions.
But a professional tile & grout cleaning company will have all the right cleaning products and equipment to clean them.
2. Extend the Life of Your Tiles
Different types of tiles require different ways of cleaning them. If you don’t use the correct cleaning methods, then you’ll be doing more harm than good.
The professionals are aware of which cleaning solution will suit the various types of tiles. So not only will they clean the tile & grout thoroughly, but they will also ensure that they are not damaged while cleaning them.
Also, they have access to specialized cleaning solutions that are designed to remove dirt and stain, yet not harm the tiles. As individuals, you may not!
3. Training and Experience
Cleaning different sizes of tile, horizontally or vertically tiled areas, older grout or recently installed grout, all of this requires extensive training and knowledge. This is something that an average homeowner may not be aware of.
Proper cleaning of tiles & grout needs a lot of scrubbing, using the proper tools and understanding the stains and how to remove them. All of this comes with plenty of experience.
Training and experience is something that a local tile & grout cleaning company has. Since they have been doing this for a long time, they are the best people to contact.
What are the Different Tile & Grout Cleaning Methods?
Most professional cleaning companies will offer different cleaning methods. Be sure to ask them about what they offer. You need to ensure that those methods are suitable for your home as well.
Hot Water Extraction
Hot water extraction is the newest and most technologically advanced tile & grout cleaning method. It uses hot water (not steam) under pressure and a powerful vacuum to flush out and extract dirt and bacteria from the grout lines.
It is an extremely effective way to remove soil and contaminants from deep grout lines and all the voids and crevices of tiles.
Steam tile & grout cleaning is very effective in killing bacteria. But it’s quite time-consuming and labor intensive. However, it’s an excellent way to sanitize the tiles & grout.
This method is commonly used by janitorial companies to clean tiles & grout in large areas. It replaces manual scrubbing described above with a floor buffer equipped with a grout cleaning brush.
What You Should Do and What You Shouldn't While Cleaning TIles & Grout?
Although a local tile & grout cleaning company will do a great job. It’s not practical to call them very often.
Experts advise hiring a professional at least once a year. But in between professional cleanings, here are a few dos and don’ts that will help maintain the tiles & grout.
- Tile & grout should be cleaned daily to prevent food and dirt from building up in the grout.
- Shower tiles should be cleaned on a weekly or bi-weekly basis. Regular cleaning will prevent excess buildup.
- Use a tile cleaning solution diluted with water at least once a week on the tiles. Allow the solution to settle on the floor for 10 minutes. This eats up some of the grime. Then wipe it and dry them off.
- Use a toothbrush to reach small crevices, especially around fixtures such as sinks showers and in corners. Wet the areas first and scrub after a few minutes. Rinse and dry. If needed, you can also put a little soap or baking soda on the end of the toothbrush to get out the dirt in small areas.
- Avoid harsh chemicals. They destroy the tile & grout over time.
- Keep mats or rugs in heavy traffic areas like a front of the sink and in the doorway. These mats will help keep dirt and grime from getting ground into the tile & grout. Ensure you clean the mats regularly.
- Use a grout sealer to make the tile & grout easier to clean and prevent grime from getting stuck in the pores of the grout. This is something that the professionals can also do in case you’re not very confident about doing it on your own.
- Use a few drops of lemon juice to help remove grout stains. Let it settle for 10 to 15 minutes and wipe dry. Lemon juice also acts as a mild disinfectant and leaves your home smelling fresh.
- Do not use cleaners containing acid or bleach for routine maintenance.
- Never use wax cleaners, oil-based detergents or sealers to maintain your tile & grout.
- Do not use ammonia or vinegar - they will discolor the grout.
- Avoid using harsh cleaning items like steel wool pads or scouring pads containing metals. They can scratch the tiles.
- Refrain from using a cleaning agent that contains color on unglazed ceramic tile or natural stone.
- Do not apply sealers on the tile or stone. Grout sealers are for grout only.
What to Check Before You Hire a Tile and Grout Cleaning Company?
License - All local and state business licenses.
Proof of Insurance - Proof of both, workman's compensation and liability insurance.
Business Stability - Find out how long the company has been in business. The more experience, the better!
Check Reviews Online - Visit sites like Yelp to find out about various tile & grout cleaning companies in your area.
References - Ask for references. If possible, call and find out about the work, timeliness, cost and whether the clients would use the company again.
Over the Phone Pricing - Not recommended at all! No professional company can give an estimate without looking at the tiles & grout.
Free Estimates - Ask for free estimates, most companies will oblige.
Safety Record - Hire a company that doesn’t have a high incidence of on-the-job mishaps or injuries.
Building Codes - In certain areas, you'll need to make sure that the local company meets all building code requirements.
Satisfaction Guarantee - Choose a company that offers a satisfaction guarantee. It will ensure that they get the job done right the first time, and save you money and frustration in the long run.
Cleanup - Ask about the cleanup services they offer.